ECS GeForce6100PM-M2 (V2.0) processor support and specifications. Home » ECS » GeForce6100PM-M2 (V2.0). Jump to: Partial motherboard specifications. Processor support list. Visitor comments. Filter by socket: Socket AM2 Socket AM2+ Socket AM3. CPU support summary. Core: Agena, Brisbane, Callisto, Deneb. Download ECS GeForce6100PM-M2 (V2.0) Nvidia AHCI Preinstall Driver free. CPU - AMD Phenom processor (Socket AM2+) - AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron process.

Answer SPDIF (Sony/Philips Digital Interface) is a digital format, is used for transporting stereo digital audio signals on PC audio cards, CD players, DVD players, and other devices which transmit or receive stereo digital audio. If your motherboard has SPDIF header, you can connect such digital devices to your computer. There are two kinds of SPDIF connections: optical fiber and coaxial cable. Here is SPDIF pin definition for you reference.

If external graphics card support SPDIF in with two pins, please also make sure graphics card's pins definition. Then connect the two cables as following to support this funciton. SPDIF out from MB Pin#1 to SPDIF in to graphics. Ground (GND) from MB Pin#4 to graphics Ground.

Question What is RAID standing for? What RAID mode can be supported on this model? Answer If you encounter the CMOS checksum error after powering on the system, please try below suggestions if the symptom is solved. Follow the prompt message to press “Del” or “F1” key enter CMOS setup menu, then Load Optimized Defaults, Save & Exit Setup. Change a new battery, then enter CMOS setup to Load Optimized Defaults, Save & Exit Setup. Update the latest BIOS.

Click to download it. If all above does not work, you may need contacting for RMA service by your seller. Question What memory clock can be support on this model?

Is there any qualified list for reference? Answer Please help to checking the following steps first. 1. Check the function of USB ports via another USB device. 2. Check the front panel and back panel both can be used or not while connecting USB devices. Check the USB controller is enabled via BIOS setup menu. Check USB device driver well installed or not under device management of operation system.

Check USB device power comsumption. It is 500mA for each ports. If device needs more power to drive, please check the device specfication and provide external to drive the device. 6. Clear CMOS by taking off the battery and install it back and then check whether system can recognize the device or not again. If all above does not work, you may need contacting for RMA service by your seller.

Question I would like to install an external PCI-Express graphics card to my motherboard, how to disable the on-board graphics? Answer The BIOS code base for GeForce6100PM-M2 comes with Award or AMI.

Then download the corresponding BIOS from below website, and update it. Award BIOS download URL: AMI BIOS download URL: *Remind, the BIOS cannot be flashed between Award BIOS and AMI BIOS.

*Please enter the BIOS setup menu by “DEL” key while start up system or follow manual instruction to get into the setup menu. - This is the AMI BIOS as the string indicated. - This is the Award BIOS as string shown in Setup menu. Question What CPU can be supported on GeForce6100PM-M2 V2.0? Answer If your board use the Award BIOS, the following link of the CPU Support Table has listed the CPU that ECS had tested and qualified. For motherboard PCB 2.0/2.0A with AMI BIOS, the following link of the CPU Support Table has listed the CPU that ECS had tested and qualified. *Please enter the BIOS setup menu by “Del” key while start up system or follow manual instruction to get into the setup menu.

- This is the AMI BIOS as the string indicated. - This is the Award BIOS as string shown in Setup menu. Question When change CPU and get the following warning message.

Is this normal? “Verifying DMI Pool Data,AMD Data Change, Update New Date to DMI!” “Verifying DMI Pool Data, AMD Data Change, Update New Date to DMI! Download Half Life Opposing Force Full Rar.

Update Success”. Answer - This is normal. When change to other AMD CPU, the BIOS will prompt, “Verifying DMI Pool Data, AMD Data Change, Update New Date to DMI!”. - Once you restart the system, DMI will be updated.